Contact us on admin@smalltiller.com

How to Start a Tiller After Winter

How to Start a Tiller After Winter
May 26, 2021 Mamun

 

For gardeners who have tiller that requires regular watering, the question on how to start a tiller after winter comes up quite often. Most tiller models are equipped with switches to activate or deactivate the rotary head. However, you can easily start your tiller using one of your own mechanisms. It does not matter if you use a manual mechanism or an electrical one. Just follow the instructions on how to start a tiller properly to avoid any problems during the operation.

If you have a manual mechanism, the first thing that you need to do is to prepare the rotary head for the next watering. After removing the holding tank and the spout, drain the water from the reservoir by opening the drain valve. You may choose to drain the water completely or just a few buckets of water is enough. Then, connect the hose to the drain pan, and attach the hose to the water source. This will ensure that the water will flow into the tiller.

Next, remove the spigot collar from the rotary head. These two equipments are usually made of stainless steel. Now, you can remove the water chamber and set it aside. Then, close the water valve and plug in the electric motor. After that, set the rotary head for the next watering.

Meanwhile, if you have an electrical mechanism, you can start your tiller by attaching the electrical terminals to the water source. Start by making sure that the tiller is turned on. You may use a flashlight for this purpose. Then, turn on the rotary head as well. A glow will be visible from the nozzle. This will help you locate the valve for the water flow control.

Now, close the water valve to the rotary head. It is important that you do not crank the valve since you do not want to start the water flow before the snowfall. It can cause accidents such as electrocution. Instead, turn the valve off.

Then, check the level of water supply. This is very important to know when to provide water to the lawn or garden or when to stop supplying water. In the former case, there may be no need for water supply because there is enough snow that has accumulated. But, in the latter case, you must stop the supply of water if there is no rain. For this reason, you should learn how to start a tiller after winter when you have no water source.

On the other hand, you need to know how to start a tiller after winter when the snow has started to melt and the water supply can be increased. You must make sure that you are bringing in the water at the correct temperature. It is better if you increase the rotation speed and circulate the water through the rotary head.

If you are looking for a way on how to start a tiller after winter, the best solution is to make use of an external water supply. The external water supply can bring in enough water for the lawn or garden. You must make sure that the water is brought inside before it freezes. Otherwise, you will be facing problems such as poor water quality and bad appearance of the soil. Moreover, you should use gravel to keep the water from flowing sideways.

It is also advisable to know how to start a tiller after winter when the lawn is still growing. During this time, the rotary head must be turning. For this, you can make use of an external water supply or water hoses. However, there are some precautions that you must follow.

It is important to consider one important factor – the depth of the water. When you want to know how to start a tiller after winter, you must consider the depth of the water that is coming into the machine. If the depth is too deep, the lawn or garden soil may freeze. Moreover, if the water depth is not deep enough, the motor of the machine may be damaged. Hence, it is important to make sure that the depth is right.

Apart from that, you must know how to start a tiller after winter when you are using powered tiller. In this case, the rotary head has to be turned manually. As the water freezes, the turning of the head can be difficult. Hence, you need to make sure that the water depth is correct and the power is on.


0 Comments

Leave a reply